22
Sentinel
™
Data Loggers
Sentinel
™
Data Loggers
23
Event: Pressing the RESET Button when a Recording has Ended
• The RED LED will remain OFF.
• The GREEN LED single-blinks.
• The unit indicates that the memory is full (double-blinking
YELLOW).
Event: The Logger is Waiting for a New Recording Session
If the
RESET
button is pressed when a recording has been scheduled,
the logger will not start recording at the previously programmed date and
time.
The unit indicates that memory is full (double-blinking YELLOW).
NOTE:
The resumption of the logger operation in the above situations
assumes that the Reset button cleared the fault(s). The Logger will not
resume normal operation if the fault condition still exists.