Sentinel
™
Data Loggers
39
Windows
®
98 SE, ME and 2000
1.
Connect the Sentinel
™
to a USB port on the computer.
2.
After a period of time you will receive a message that New Hardware
has been detected.
3.
Windows
®
will complete the driver installation process automatically.
At this time you should be ready to go to the next section
(
§ 5.3 - Connecting
to the Sentinel Logger
)
.
Windows
®
98
1.
Connect the Sentinel
™
to a USB port on the computer. The
Found
New Hardware
window will be displayed.
2.
Select
Next
to begin the installation.
3.
Select
the
Search for the best driver for your device
option.
4.
Select the
Next
button.
5.
Select
Specify a location
.
6.
Type
C:\CA\USB
into the specify location edit box. This refl ects the
default destination for an installation that was installed on drive C. If
the Sentinel
™
USB Drivers were installed onto another drive, then that
drive letter should be substituted.
7.
Select the
Next
button. At this point Windows
®
should have found the
driver at the specifi ed location.
8.
Select
the
Next
button.
9.
Select
the
Finish
button.
Once the fi rst level driver has been installed, you will be asked a second
time to search for a driver. When this happens restart at step 2.
At this time you should be ready to go to the next section
(
§ 5.3 - Connecting
to the Sentinel Logger
)
.