If the reverse clamping pliers, negative power is detected. (Parameter Number 2, Parameter Size 1)
Value
Description
0
Disabled (Default)
1
Enabled
Automated Report only when power is changed (Parameter Number 3, Parameter Size 1)
Value
Description
0
Disabled (Default)
1
Enabled
Minimum Change to send Report (Watt) for the whole HEM (Parameter Number 4, Parameter Size 2)
The value represents the minimum change in Wattage for a Report to be sent .
Value
Description
0 — 32000 W (Default 50)
Minimum Change to send Report (Watt) for clamp 1 (Parameter Number 5, Parameter Size 2) The value
represents the minimum change in Wattage for a Report to be sent .
Value
Description
0 — 32000 W (Default 50)
Minimum Change to send Report (Watt) for clamp 2 (Parameter Number 6, Parameter Size 2) The value
represents the minimum change in Wattage for a Report to be sent .
Value
Description
0 — 32000 W (Default 50)
Minimum Change to send Report (Watt) for clamp 3 (Parameter Number 7, Parameter Size 2) The value
represents the minimum change in Wattage for a Report to be sent .
Value
Description
0 — 32000 W (Default 50)
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 5
