- -
2
Quick Start
3
Getting your Aeotec Repeater up and running is as simple as plugging it into
a wall outlet and linking it to your existing Z-Wave network. The following
instructions tell you how to link your Repeater to your Z-Wave network using
Aeotec's Z-Stick or Minimote controllers. If you are using other products as
your main Z-Wave controller, please refer to the part of their respective
manuals that tells you how add new devices to your network.
If you’re using a Z-Stick:
D e c i d e o n w h e r e y o u w a n t y o u r
Repeater
to
be
placed
and
plug
it
in. Its
main
light
will
begin
to
blink.
If your Z-Stick is plugged into a gateway
or a computer, unplug it.
Take your Z-Stick to your
Repeater
Press the Action Button on your Z-Stick.
P r e s s t h e A c t i o n B u t t o n o n y o u r
Repeater.
I f
y o u r
R e p e a t e r
h a s
b e e n
successfully
linked
to
your
network,
its
light
will
no
longer
blink. If the
linking was unsuccessful the light will
continue to blink.
Press the Action Button on the Z-Stick
to take it it out of installation mode.
1.
2.
3.
4.
5.
6.
7.
