20
4.2 TROUBLE SHOOTING
Oil level too low / high oil consumption
Normal oil consumption.
External oil leaks.
Oil not changed often enough.
Worn piston rings.
Faulty heat gasket.
Oil contamination
Worn piston rings.
Faulty heat gasket.
Oil or filter not changed often enough.
4.3 ENGINE OIL LEVEL
To check the oil level:
1. Set machine on a level surface.
2. Start and run engine for 20-30 seconds. This
will return oil to its true level in the engine
sump.
3. Stop engine and check oil level sight glass.
4. Check to see that the oil level is in the
“normal” range. The level should be, at
minimum, halfway between to the top of the
viewing area. Add oil as needed to reach the
indicated level shown. Do not overfill.
NOTE:
Do not fill the over the normal oil
operating range. Filling over the normal
operating range could cause a mist of oil to enter
the air box.
NOTE:
Rising oil level between checks in cool
weather driving, can indicate moisture collecting
in the oil reservoir. If the oil level is over the full
mark, change the oil.
Summary of Contents for Cobra 220
Page 1: ...AEON MOTOR CO LTD SERVICE MANUAL...
Page 63: ...62...
