23
CAUTION:
The crankshaft end contains an oil
passage plunge joint (A) as shown below. The
plunger must be able to move in and out freely.
Avoid damage to the crankshaft end or plunge
joint and spring, which can cause loss of oil
pressure, resulting in severe engine damage.
6. Remove the oil passage plunge joint,
flywheel nut and washer.
7. Install Flywheel Puller (
PN PA-47308
) and
remove flywheel.
CAUTION:
Do not
hammer or strike the tool while attached to
the crankshaft end, which may become
damaged.
8. Remove the hex bolts that attach the
one-way drive clutch to the flywheel.
9. Inspect the bearing surfaces and drive teeth
for signs of wear or gouging. Replace the
one-way clutch as assembly if it is not
working properly.
Note:
One-way clutch components are not
serviceable. Replace the component as an
assembly.
Summary of Contents for Cobra 220
Page 1: ...AEON MOTOR CO LTD SERVICE MANUAL...
Page 63: ...62...
