52
NOTE:
Use two hands to hold the cam plate
and the primary sliding sheave together when
removing the primary sliding sheave and the
cam plate assembly. This prevents the roller
weights from falling out of the assembly.
Remove the roller weights from the primary
sliding sheave. Check the rollers for wear and
scoring. Remove and inspect the slide bushings
and cam plate. Replace any components that
found to be worn excessively or appear
abnormal.
To reassemble, reverse the procedures. Do not
apply any lubricants to the components. Torque
the retaining nut to
40 ft. lbs. (55 Nm).
CVT SYSTEM / DRIVEN CLUTCH
SERVICE
NOTE:
This assembly utilizes a torque limiting
system to prevent transmission damage. Use care
removing the clutch assembly, as the torque
-limiting components become free and could fall
apart. Mark or note parts during disassembly.
Summary of Contents for Cobra 220
Page 1: ...AEON MOTOR CO LTD SERVICE MANUAL...
Page 63: ...62...
