2021. 05. 04.
Control devices - Smart Home Hub : Aeotec Help Desk
https://help.aeotec.com/support/solutions/articles/6000247430-device-control-smart-home-hub
1/2
Control devices - Smart Home Hub
Modified on: Sat, 24 Apr, 2021 at 9:37 PM
This solution will tell you how you can control your devices using
(https://aeotec.com/smartthings/)
. It
forms part of a broader guide on managing and using Smart Home Hub which can be found
(https://aeotec.freshdesk.com/a/solutions/articles/6000240160)
a.
Control connected devices
Each device will have a standard way to controlling them for example, a Z-Wave switch or a Zigbee switch will have the
same or similar interfaces to allow you to toggle them on/off wirelessly. Most devices will allow you to control them or
view their device information details by selecting the individual devices on the front dashboard of SmartThings
Connect.
For switches, you can toggle it on and off from the dashboard (a small circular button will appear on the top right side
of the widget to easily control the connected device).
For sensors, the main sensor detail will be displayed.
To control devices or view device sensor information over dashboard
1. Open SmartThings Connect.
2. Scroll down to find the device you want to view.
If you have a Switch, Dimmer, Shutter, or other on/off type devices, you can tap on the smaller icon on
the widget to turn that device on or off.
If they are temperature, humidity, door, or water sensors, you can view the main function of that
device over the dashboard.
Temperature shows the temperature value.
Humidity shows humidity level.
Door sensors show open/close states
Water Sensors show wet/dry states.
To access more details about the device if available, follow the steps below.
1. Open SmartThings Connect.
2. Scroll down to find the device you want to view.
3. Tap on the device icon directly (
do not tap any smaller icons if they appear on it
).
This will bring you to the details of this device, and if other secondary functions or details are available to
control, they will be present in that page.
Possible device settings.
1. Open SmartThings Connect.
2. Scroll down to find the device you want to view.
3. Tap on the device icon directly (do not tap any smaller icons if they appear on it).
4. Tap on the More Options icon (top right corner)
5. You'll have 2 or 3 options.
1. Edit