BC 2000
DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centers
HARDWARE MANUAL
29
3.10. BC2207. AES/EBU digital outputs module.
General description.
The BC2207 board can manage eight TDM OUT bus time-slots to extract four AES3 (or SPDIF)
digital stereo signals from the system.
This board is inserted into the rear part of the BC2000DF rack.
Panel description.
'HW ERROR' red LED*: this LED will turn on when the
system starts and, depending on its status, it will indicate
during normal operation:
-
Configured and active board: fast blinking.
-
Not configured board: slow blinking.
-
Board start error: LED on and fixed.
-
Board configured in backup mode: LED off.
'2' RJ45 type connector: 4 AES3 format digital
stereophonic outputs. The default format is 48 kHz and
24 bits.
'3' RJ45 type connector: 4 independent inputs
configurable as general purpose inputs (GPI).
'4' RJ45 type connector: 4 independent outputs
configurable as general purpose outputs (GPO).
*
This operation way of 'HW ERROR' LED is valid for 4.06 microcontroller
module firmware version (and later versions).
