BC 2000
DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centers
HARDWARE MANUAL
65
3.26. BC2250. Front control panel.
General description.
The front control panel of the system allows you to activate/deactive remotely (with no need to
use the real-time control software) the previously defined macros and gives you access to
system status information.
This panel is connected into the front part of the BC2000DF rack.
Panel description.
128x64
GRAPHIC
OLED
DISPLAY:
it
shows
the
available menus and options
and also the information
regarding the system status.
'POWER ON' green LED:
indicates the presence of
feed power in the rack.
'ALARM' red LED: indicates
a power supply or a status
failure in any of the boards.
'MASTER CTR.' green LED:
indicate which is the active
controller board: the LED
lights when it’s the master
and it’s off when it’s the
slave.
PUSHBUTTONS:
the
5
pushbuttons set allows you to
move through the available
menus and options.
'TX/RX'
green
LED:
indicates
communication
between
BC2215*
and
controller board.
'EXT. SYNC' green LED:
indicates that the system
synchronism
clock
is
external.
*
See BC2000D Multiplexer system
users manual.
