BC 2000
DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centers
HARDWARE MANUAL
74
5. Standard wiring systems for BC-2000 D system.
Various wiring accessories and kits have been defined to make it easier to make the audio and
GPI/GPO connections required by the BC 2000 D consoles and matrixes.
The high degree of integration of the BC 2000 D makes it possible to use 8-pole, high density,
RJ45 type connectors on the input and output boards. Each one of these connectors is fitted
with four audio or GPI/GPO circuits.
A complete accessory system has been prepared to make crossing connections easier between
easily connected, highly integrated 3-pole WAGO connectors or the classic XLR audio
connectors and the shielded 8-pole RJ45 connectors accepted by the BC2000DF rack boards.
We have even chosen several types of cable and connectors to supply “loose” to ease the work
of wiring a studio equipped with a BC 2000 D system.
5.1. Individual connection components.
The following paragraphs describe the different types of individual elements we offer for wiring
the BC 2000 D system.
5.1.1. BC 2000 CAB RACK chassis.
Code 620-000-000. 4 U x 19” connection rack that can house up to:
•
6 BC 2000 CAB W connection modules, each fitted with 12 circuits with WAGO male
connectors, or
•
6 BC 2000 D CAB XLR connection modules, each fitted with 4 circuits with XLR
connectors which can be male, female, or two male and two female
connectors.
Its special design, with upper and lower slots that permit access to the rear part from the front
panel, allows both the 8-pole plus ground RJ45 cables that go to the BC 2000 D rack and the 2-
pole plus ground cables that come out of the WAGO or XLR connectors to be led in either from
the front or rear panel.
Dimensions: 4 U x 19 “ (482.6 x 178 mm), 120 mm deep.
Approximate weight: 1,600 grams.
