background image

8

Dual 

mix 2

User manual

Content Page

1. Introduction  

 

2. Important Safety Instructions  

 

3. Controls and Connections  

  10

4. Operation Summary   

  11

4.1 Cabling and Starting-up  

  11

4.2 Level Adjustment 

  11

5. Functional Characteristics  

 

 

5 5.1 Inputs Channel 1 and Channel 2  

  11 

 

5.1.1 Signal sources and preamp selection  

  11 

 

5.1.2 Dual-band Equalization  

  12  

 

5.2 efx – Effects Section Muliteffect  

  12  

 

5.3 aux in  

  12  

 

5.4 master  

  12  

 

5.5 DI-out  

  12  

 

5.6 24V-Phantom-Power  

  12

6. Technical Specifcations 

  13 

1. Introduction

Welcome to AER

.

hank you for purchasing an AER Pocket Tool. You are now 
the owner of a professional audio preamp, designed and 
manufactured to the highest pro audio technical specifica-
tions; capable of shaping, maximizing and delivering the tonal 
character of your instrument. At AER our complete focus, some 
say obsession, is on the ‘true’ reproduction of natural acoustic 
sound. A lifetime spent listening to and working with acoustic 
instruments helps us to create and refine the very best devices 
available; to enable you to craft your own unique acoustic 
identity. Make your instrument the very best it can be .
Please take a moment to read this brief manual. We want you to 
understand how our product works and what it can do for you. 
We want you to gain benefit from its many features but most of 
all we want you to ENJOY it!
The dual mix is a high-quality „two-channel“ preamplifier for 
instrument/line or microphone signals. The unit offers simple, 

efficient features just like a small mixing console:
–  two inputs, each for one microphone or instrument and line-

level signal with switchable 24V-phantom-power

– separate active two-band EQ networks for each input

– a 4-preset multi-effects-unit with two reverbs, one echo and 

one chorus 
– a stereo aux-in 
– line-out and DI-out 
– plus a stereo-headphone-preamplifier

This makes the dual mix especially suited for the  

following applications:

-   as channel extension in connection with AER-amplifiers (the 

line output of the dual mix is connected e.g. with an amp‘s 
effects return)

-   as instrument/microphone stage preamp (the line out or DI-

out of the dual mix is connected directly to the mixing-desk/
stagebox)

-   as headphone rehearsal amplifier in connection with a stereo 

headphone set

All pocket tools need energy for their high-grade circuits and 
are powered by 24V-power-supplies. An appropriate supply is 
included in delivery.
Read on and have fun using your 

dual

 mix 2!

Summary of Contents for Dual mix 2















Reviews: