3
SAFETY
TOOLS REQUIRED FOR INSTALLATION
WARNING:
To avoid the risk of electrocution confirm the electrical supply has been disconnected or switched off before beginning any installation work.
Confirm no electrical wiring, utility pipes, or duct work is located directly behind the installation / drilling area.
On a stud wall, it is strongly recommended at least 2 mounting anchors for the air purifier be mounted to an existing stud.
• Electric drill, drill bits (not included)
• # 2 Phillips and # 2 Flat Head screw drivers (not included)
• Wire nuts (not included)
• Level (not included)
• Mounting template (included)
Fig 2
8”
PARTS PROVIDED FOR INSTALLATION
PRODUCT INSTALLATION GUIDELINES
Americans with Disabilities Act (ADA):
Be sure to follow all ADA guidelines pertaining to “Objects protruding
into a circulation path.” For more information visit www.ada.gov.
Place the mounting template provided on the wall where the air
purifier is to be installed. If air purifier is being mounted high on
the wall make sure the top edge of the unit is positioned at least
8” inches (21 cm) below the ceiling to allow for filter replacement
(see Fig 2).
• Drywall Anchors - 10mm OD
• Pan Head Phillips Screws
