aerauliqa QR120P-W, Instructions For Installation, Use And Maintenance Manual

25

 FUNCTIONALITY

DESCRIPTION

TOUCH

BUTTON

ICON

LED

COLOUR

On/Off

Pressing the touch buttom the unit is activated/deactivated

-

-

Continuous running speed

Speed I factory set is 40%: if necessary it can be adjusted by acting on 
the dip switch inside the terminal box as indicated in Fig. 6.a

and

I

green

Speed II factory set is 70%: if necessary it can be adjusted by acting on 
dip switch inside the terminal box as indicated in Fig. 6.a

and

II

green

Speed III factory set is 100%: if necessary it can be adjusted by acting on 
dip switch inside the terminal box as indicated in Fig. 6.a

and

III

green

BOOST

The unit will run at speed III for a fixed period of  15’. At the end of 
this time, the unit returns to the previously set speed.

III

green 

flashing

Filter reset

Every 3 months the controller alerts the user to perform filter 
maintenance. By pressing the button for at least 1 second, the timing 
is reactivated

yellow

 Antifrost

The unit is equipped with a thermistor that, when necessary, reduces 
the speed of the inlet fan to prevent the formation of ice in the 
exchanger, which would irreparably damage the exchanger itself. 
When conditions return to normal, the function is automatically 
deactivated.

-

blue

 Motor anomaly

In case of a motor malfunction, the red led lights up. Contact technical 
assistance.

-

red

Keypad lock

The CTRL-V1 buttons can be blocked. Keep the       and        buttons 
pressed contemporaneously for at least 5 seconds.
Repeat this opeartion to unlock

(keep pressed for 

at least 5 seconds)

yellow

to activate/deactivate the unit
to change the speed
to change the speed

to manually activate the Boost function

to reset the filter alarm

green led: speed 1 indicator
green led: speed 2 indicator
green led: speed 3 indicator
blue led: anti-frost activation indicator
red led: malfunction indicator
yellow led: filter maintenance/replacement indicator
yellow led: keypad lock indicator

Fig. 7.b 

CTRL-V1 

f

g

h

e

d

c

b

a

a
b
c

d

e

f

g

h

i
j

k

l

l

k

j

i

7.1 3-speed operation with CTRL-V1 remote control (supplied as standard)

In the absence of alarms, the CTRL-V1 remote control goes into standby mode (no LEDs on) 3 minutes after the last button press.

and

to change the speed

to change the speed

to change the speed