Aercus Instruments™
- WeatherSleuth®
43 |
P a g e
display
Received a Read Request
from the WeatherSleuth® receiver. A
green progress bar will provide you with the upgrade status.
DO NOT OPERATE THE MOUSE OR KEYBOARD WHEN
UPGRADING
to prevent interruption of the upgrade.
8.
Once the firmware upgrade is complete, the dialog box will display
Read session
is completed successfully
, as shown in Figure 30.
9.
Wait about one minute for the WeatherSleuth® receiver to reboot. You can
now
Exit
the upgrade window, and access the module again, as referenced in
Section 3.6.4.
All of the lights should be on except the Server light (you will need to reprogram the
Wunderground.com settings).
FOR FURTHER ASSISTANCE CONTACT THE APPROPRIATE SUPPLIER AS PER THE
CONTACT SECTION AT THE START AND END OF THIS MANUAL
Summary of Contents for WeatherSleuth
