WS2083
- 12 -
(default 4hPa). When there is a fall below the pressure threshold within any given 3 hour period, the storm
forecasting will be activated and the clouds with rain icon as well as the tendency arrows will flash for 3 hours
indicating the storm warning feature has been activated.
Indoor Temperature
Press the
MENU
key eight times to select the INDOOR TEMPERATURE section, the INDOOR TEMPERATURE
section digits will start flashing. Press the
UP
or
DOWN
key to change the temperature unit between C and F.
Press the
ENTER
key to select the following modes:
Indoor temperature high alarm (press
ON/OFF
to enable/disable). If the alarm is enabled, an
alarm symbol
appears in the display.
Indoor temperature low alarm (press
ON/OFF
to enable/disable). If the alarm is enabled, an alarm
symbol
appears in the display.
Maximum temperature (since last reset). Resetting the maximum indoor temperature value -
when both the indoor temperature value and MAX icon are flashing, hold the
ENTER
key for 3s, the
maximum indoor temperature value will be reset to the current reading.
Minimum temperature (since last reset). Resetting the minimum indoor temperature value - when
both the indoor temperature value and MIN icon are flashing, hold the
ENTER
key for 3s, the
minimum indoor temperature value will be reset to current reading.
Indoor Humidity
Press the
MENU
key nine times to select the INDOOR HUMIDITY section, the INDOOR HUMIDITY section digits
will start flashing. Press the
UP
or
DOWN
key to change the humidity high alarm (press
ON/OFF
to
enable/disable). If the alarm is enabled, an alarm symbol
appears in the display.
Press the
ENTER
key to select the following modes, then press the
UP
or
DOWN
key to set the value:
Indoor humidity low alarm (press
ON/OFF
to enable/disable). If the alarm is enabled, an alarm
symbol
appears in the display.
Maximum humidity (since last reset). Resetting the maximum indoor humidity value - when both
the indoor humidity value and MAX icon are flashing, hold the
ENTER
key for 3s, the maximum
indoor humidity value will be reset to the current reading.
Minimum humidity (since last reset). Resetting the minimum indoor humidity value - when both
the indoor humidity value and MIN icon are flashing, hold the
ENTER
key for 3s, the minimum
indoor humidity value will be reset to the current reading.
Outdoor Temperature
Press the
MENU
key ten times to select the OUTDOOR TEMPERATURE section, the OUTDOOR TEMPERATURE
section digits will start flashing. Press the
UP
or
DOWN
key to change the temperature display mode between
Temperature, Wind Chill and Dew Point.
