background image

 

WS2083 

- 2 - 

WS2083 PROFESSIONAL WIRELESS WEATHER STATION WITH USB 

UPLOAD

 

   

Operation Manual 

 

 
About This Manual 

Thank you and congratulations on selecting this professional weather station.    We are positive you will enjoy 
the benefits of accurate weather readings and information that our weather stations offer.    This manual will 
guide  you  step-by-step  through  setting  up  your  device.  Use  this  manual  to  become  familiar  with  your 
professional weather station, and save it for future reference. 
 

Important! 

 

Warranty and Support 

We  warrant  our  products  to  be  free  of  defects  in  components  and  workmanship,  under  normal  use  and 
service,  for  one  year  from  the  date  of  original  purchase.  For  product  support  and  warranty  claims  please 
contact the following: 
 

 

Purchased  in  UK/EU:

    As  many  issues  can  be  a  result  of  incorrect  setup  please  contact  our  local 

distributor Greenfrog Scientific 

www.greenfrogscientific.co.uk

 and their team will be happy to help.   

Genuine faults can typically be diagnosed without requiring the unit to be returned and replacement 
parts sent quickly if needed. 

 

 

Purchased in AUSTRALIA:

    As many issues can be a result of incorrect setup please contact our local 

distributor Monax Test & Weather 

www.monaxtestandweather.com.au

 and their team will be happy 

to  help.    Genuine  faults  can  typically  be  diagnosed  without  requiring  the  unit  to  be  returned  and 
replacement parts sent quickly if needed. 

 

 

Purchased in NEW ZEALAND:

    As many issues can be a result of incorrect setup please contact our 

local  distributor  Scientific  Sales 

www.scientificsales.co.nz

  and  their  team  will  be  happy  to  help.   

Genuine faults can typically be diagnosed without requiring the unit to be returned and replacement 
parts sent quickly if needed. 

 
For all others please contact the retailer who sold you this item.     

Summary of Contents for WS2083


















Reviews: