4/25
TF6595_A
Aereco S.A.
–
62 rue de Lamirault
–
Collégien 77615 MARNE
LA VALLEE CEDEX 3
FRANCE
Tel. +33 1 60 06 26 63
–
fax +33 1 64 80 47 26
www.aereco.com
ZLT Lüftungs- & Brandschutztechnik GmbH
Wilhermsdorfer Str. 28 - 09387 JAHNSDORF
GERMANY
Tel. +49 37296 / 93620
–
Fax: 037296 / 936250
www.zlt.de
3.
INTRODUCTION
3.1.
Information
ZLT GmbH Company ensures the total manufacture of VCZ fans. All the VCZ fans are then sold through
Aereco Group.
3.2.
Warnings
BEFORE DISASSEMBLING THE APPLIANCE, PLEASE READ THESE
INSTRUCTIONS CAREFULLY.
▪
The manufacturer cannot be held liable for irreversible damage caused by disassembling the
product in the aim at recycling the product.
▪
This manual describes the required tools for the manual disassembly of electronics parts
(printed wiring boards/ printed circuit boards and displays > 10 g or > 10 cm2), batteries and
larger plastic parts (> 100 g) for the purpose of efficient materials recycling.
▪
Wearing suitable gloves while handling the product is strongly recommended (some of the
metal parts may have sharp edges).
Reminders of elementary safety rules:
The disassembling of an electrical appliance requires observance of the following
elementary rules:
▪
Do not touch the appliance, even if it is earthed, if your body is moist or wet (hands, feet,
etc.);
▪
This system is not designed to be disassembled by persons whose intellectual and/or mental
faculties are impaired, or who lack experience and knowledge (including children), unless
they have been trained and are supervised by a person responsible for their safety during
disassembling. To eliminate any risk of an accident, keep them away from the appliance;
▪
The electrical disassemble must be done by a qualified technician, in accordance with the
manufacturer's recommendations and in a manner consistent with the characteristics of the
product;
▪
Before doing any work on the appliance, unplug it or otherwise disconnect it from its power
supply and make sure that the power cannot be restored accidentally while the work is being
done;
▪
Young children must be kept far away from the appliance in order to ensure that they do not
play with it.
Before starting the disassembling procedure, ensure that the appliance is
disconnected from the electric circuit and volt-free. Secure against unintentional
restart. Do not open the housing before the complete stop of the fan impeller.
