TROUBLESHOOTING
In the event you have issues with your VIDIUS HD please check here:
Drone won’t lift off of ground or flips over right away:
1. Check the location of your A&B blades to match page 2.
2. Remove blades, clean any hair, debris from posts and motor base.
3. Make sure your drone and remote batteries are fully charged.
4. Check that blades are not bent or damaged, replace as needed.
Drone drifts heavily in one direction:
1. Make sure your Trimmer settings are at CENTER (long beep)
2. Make sure all blades are evenly and fully seated on driveshafts
3. Remove blades, clean all debris from posts and motor base.
4. Remove Batteries from Controller for 90 seconds; replace.
5. Restart and Pair Drone and Controller (page 4)
6. If 1-4 did not solve please recalibrate your drone (page 4)
7. If 1-5 did not work please email fly@aerixdrones.com for help.
Controller and Drone won’t connect:
1. Replace the batteries in the controller with BRAND NEW ones.
2. Charge the drone and try again (page 4) be sure to turn drone on first.
3. Try to pair VIDIUS HD via wifi to the Flight App, contact us with results.
One or more lights/motors stopped working:
1. Please contact fly@aerixdrones.com for futher assistance.
Can’t View Live Video on Device:
1. Be sure to turn drone on first, then connect via wifi on your device.
Other APP Related Issues:
1. Try restarting smartphone, if problem persists unistall/reinstall App.
2. Be sure installed App is most up-to-date version.
CHANGING BLADES
- To remove blades, firmly grasp the center of the blade and pull UP.
- To replace blades, firmly press the new blade DOWN onto shaft.
- Adjust blades to be straight and even, no bends or twists.
- Location of A&B Blades should always be as shown on page 2.
