background image

Set: 40.0°C

44.5

40.0°C

NO PRG

°C

: ON

: OFF

SET. DOMESTIC HOT WATER

DOMESTIC HOT WATER

TIMED PROGRAM OFF

A

B

C

A

B

C

D

D

Italian

o

English

F

rançais

Deuts

ch

Españo

l

Modify DHW status

In the DHW modification window, you can make the following settings: 

A

DHW setpoint:

 press the 

 (increase) and 

 (decrease) keys on the 

same line as the setpoint you want to change. 

B

The timed program active on DHW:

 press the 

 (increase) and 

(decrease) keys on the same line as the setpoint you want to change.

C

Activate the heat pump for DHW production: 

press 

 to choose 

whether to activate or deactivate the heat pump for DHW production

D

Activate the additional heat source (RAS, boiler, etc.) for DHW pro-

duction: 

press 

 to choose whether to activate or deactivate the additional 

heat source (RAS, boiler, etc.) for DHW production.

To move on to the next page, press 

 . To return to the previous page, press 

. The homepage will be restored automatically if 5 minutes elapse with no 

interventions.

DHW MENU

View DHW status

In the DHW menu, you can view or set the data for DHW production (if envis-
aged, and if the DHW management expansion has been correctly installed). 
The information available is as follows:

A

 Temperature in the DHW storage tank

B

 DHW setpoint

C

 The timed program active on DHW:

• 

NO PRG: no timed program active on DHW

• 

PRG 1~5: timed program 1~5 active on DHW

D

 Current status of the loads relating to DHW production. This status is indi-

cated by the colours of the icon components:

• 

1

 : DHW request satisfied and/or not active

• 

2

 : DHW active, using the heat pump only

• 

3

 : DHW active, using the heat pump and the additional heat source 

(RAS, boiler, etc.)

• 

4

 : DHW active, using the additional heat source only (RAS, boiler, etc.)

• 

5

 : anti-legionella cycle in progress

1

2

3

4

5

The keys along the bottom of the window have various functions:

Enabling or disabling DHW:

 press the 

 key (green = enabled; red = dis-

abled)

Accessing the DHW settings page:

 to access the page, press 

To return to the previous page, press the 

 key. The homepage will be re-

stored automatically if 5 minutes elapse with no interventions.

5

Summary of Contents for VMF E6
















Reviews: