AERMEC WLRC20, User Manual

15

Setting Night-Time Comfort 

function

ON/OFF

TURBO

CLOCK

T-ON/T-OFF

TEMP

SLEEP

I FEEL

SWING

FAN

MODE

LIGHT

WIFI

QUIET

NB:

The night time comfort function is deactivated 

by switching off the unit, and on restarting will 

not be active; this function can be activated at 

any time.

ACTIVATING / DEACTIVATING THE NIGHT-TIME 
COMFORT FUNCTION

The night-time comfort function controls the air 

conditioner in an optimal way during the night. The 

following logic is applied:

•  In cooling or dehumidification: the temperature 

set-point is gradually increased to guarantee 

maximum comfort combined with energy saving.

•  In heating: the temperature set-point is gradually 

increased to guarantee maximum comfort combined 

with energy saving.

• 

If the unit is on (except in automatic or ventilation 

mode), pressing the 

SLEEP

 activates or deactivates the 

night time comfort function. If the function is active the 

icon  is displayed on the remote control.

Night-time comfort SLEEP function 1   

It can only be selected in the cooling mode and heating 

modes.

•  In cooling mode: the temperature increases by 

1 °C after one hour, and by 2°C after two hours of 

operation.

•  In heating: the temperature decreases by 1 °C after 

one hour, and by 2°C after two hours of operation.

Night-time comfort SLEEP function 2 

It can only be selected in the cooling mode and heating 

modes.

The SLEEP function 2 includes different operating 

programs depending on the setpoint temperature.

Night-time comfort SLEEP function 3 

It can only be selected in the cooling mode and heating 

modes.

The SLEEP function 3 (DIY) makes it possible to 

program the room temperature, hour by hour, up to a 

maximum of 8 hours. 

After selecting the SLEEP 3 mode  , keeping pressed 

the button TURBO for several seconds, the temperature 

on the remote control display will start blinking. 

At this point it is possible to program the desired 

temperatures as in the example table here (to confirm 

the temperature and move to the next hour setting, 

press again the button TURBO):

set temperature 18 °C
set temperature 19 °C
set temperature 20 °C
set temperature 21 °C
set temperature 22 °C
set temperature 23 °C
set temperature 24 °C
set temperature 25 °C