AERMEC WLRC20, User Manual

7

SELECTING AN OPERATING MODE

If the unit is on, pressing the 

MODE

 button allows 

passing from one operating mode to the next, in this 

sequence:

AUTO mode

COOL mode

DRY mode

FAN mode

HEAT mode

MODE

ON/OFF

FAN

CLOCK

X-FAN

TURBO

SLEEP

LIGHT

TEMP

TIMER OFF

TIMER ON

The various operating modes have different features 

and ranges:

•  AUTOMATIC mode (AUTO): in this mode, the 

remote control does not display any set-point value 

and the fans speed is set to AUTO.

•  COOLING mode (COOL): in this mode the user must 

set the operating set-point and a fan speed; if the 

room temperature is higher than the set value, which 

can be seen on the display, the air conditioner will 

continue to cool the air until the room temperature 

will reach the setpoint value.

•  DEHUMIDIFICATION mode (DRY): in this mode 

the user must set the operating set-point but not 

the fan speed (which remains fixed at minimum); if 

the room temperature is higher than the set value, 

which can be seen on the display, the air conditioner 

will continue to dehumidify the air until the room 

temperature will reach the setpoint value.

•  VENTILATION mode (FAN): in this mode the user 

must set only the fan speed. This mode provides no 

heating or cooling but only uses the internal fan to 

ventilate the space.

•  HEATING mode (HEAT): in this mode the user must 

set the operating set-point and a fan speed; if the 

room temperature is lower than the set value, which 

can be seen on the display, the air conditioner will 

continue to heat the air until the room temperature 

will reach the setpoint value.

Operating mode selection

ON/OFF

TURBO

CLOCK

T-ON/T-OFF

TEMP

SLEEP

I FEEL

SWING

FAN

MODE

LIGHT

WIFI

QUIET