5
STOP button on Touchpad: The STOP button can be pushed at any time to cancel all inputs.
Pushing the STOP button will stop the disinfection sequence.
Emergency Pushbuttons: If either of the red Emergency Pushbuttons on the top of the
device are pressed, Aero HygenX RAY – Autonomous UVC Robot will:
a) remove power from lamps; and
b) remove power from drive unit.
Protective Cage: Aero HygenX RAY – Autonomous UVC Robot is equipped with a protective
cage to prevent damage to the lamps during transport of unit. Although the cage is
removable, Aero HygenX recommends leaving the cage on during operation of unit.
Environmental Cover: In addition to the cage, Aero HygenX RAY – Autonomous UVC Robot
also comes with an environmental cover, which fits over top of the cage, providing protection
from water/moisture/dust ingress. The environmental cover should be in place when the
device is being transported outdoors.
Amber Warning Lights: During the start-up sequence, amber flashing lights on either end of
the top cover illuminate indicating that the UVC lamps are now armed and the system is
powered for use. (The start-up sequence is initiated by ensuring the Emergency
Pushbuttons are UP, followed by the Master Power Switch being turned ON)
Master Power Switch: The large red rotary knob on the back end of Aero HygenX RAY –
Autonomous UVC Robot is the Master Power Switch. Turning the Master Power Switch OFF
disconnects the Main Battery from all electronics and lamps and allows for safe transport or
maintenance of the unit.
Use this unit only in the manner intended by the manufacturer. If you have questions, contact the
manufacturer at the address or telephone number on the label.
For more information regarding
automatic safety features, contact the Aero HygenX Helpline @ (1-800-260-0787).
