9
AREA OF COVERAGE
a.
Aero HygenX RAY – Autonomous UVC Robot incorporates a unique design which
has been engineered for both single and dual-aisle aircraft. The lamp array allows
for maximum UVC light exposure on to the high-touch surfaces of an aircraft.
To
sanitize or disinfect, the UV light must have direct line-of-sight with target surfaces.
b. By eliminating the need for an operator to be present during the treatment process,
the autonomous operation of Aero HygenX RAY – Autonomous UVC Robot allows
for safe UVC treatment at the push of a button.
c. The powerful 24V LiFePo 50Ah battery allows for a minimum of 6 dual-pass
treatment before recharging is required.
START SEQUENCE
Aero HygenX RAY – Autonomous UVC Robot
has 3 modes of Operation:
(1) FORWARD:
Aero HygenX RAY – Autonomous UVC Robot
will move down the aisle (away from the operator)
until detecting a wall or obstruction and will then come to a STOP.
(2) LOOP:
Aero HygenX RAY – Autonomous UVC Robot
will move in the direction of the chevron labelled “1”
until detecting a wall or obstruction, stop momentarily, then reverse direction and move back down
the aisle, in the direction of the chevron labelled “2”, until detecting another wall or obstruction, and
will then come to a stop.
(3) REVERSE:
Aero HygenX RAY – Autonomous UVC Robot
will move down the aisle (towards the operator) until
detecting a wall or obstruction and will then come to a STOP.
