MANUAL
EV4 MOUNTAIN BOARD
2019-03-01
VERSION 1.00
Page
14
of
21
To avoid injury when using EV4, wear protective equipment. Equipment includes bicycle helmet, knee and elbow
pads. Protective gloves are recommended during repairs and maintenance
.
10.
Use
10.1.
How to operate the EV4
We start the ride by switching on the skateboard and remote control. If the LED lights signal the connection of the
remote control with the vehicle and show that the batteries of thevehicle and remote are charged, the Mountain Board is ready
for operation. You can start to move in two ways. Take a comfortable position on the skateboard, with the center of gravity
placed low (never drive on the upraised legs) and legs spaced wider than the arms, gently push the remote's acceleration stick
forward to move the vehicle. When starting to move at full speed, the center of gravity should also be transferred to the leading
leg, otherwise rider may be thrown off the skateboard. The second way is to push off with one leg letting vehicle move and
then use the remote add speed. Braking starts once the remote stick is pushed down in the opposite direction to accelerating.
In case of sudden braking, the center of gravity should be transferred to the rear leg. Correct leg formation is also important
when changing directions of riding. Turning should be carried by moving the center of gravity on toes or heels of both feet.
Advanced riders can work their own style of riding.
