“AERO” Sp. z o.o.
SECTION 8
AT-3 R100
SERVICING
SEPTEMBER, 2004
Page 8-3
AEROPLANE FLIGHT MANUAL
8.3 Aeroplane repairs or modifications
Any repair or modification of the aeroplane design may only be
performed by authorized personal.
NOTE
Prior to any modification of the aeroplane, ensure with the Civil
Aviation Authority, that the intended modification will not negatively
affect the airworthiness of the aeroplane
After completing the modification, according to the instructions given in
the Aeroplane Maintenance Manual, the aircraft should be re-weighed,
and the respective weighing report sheet completed and the Weight and
Balance schedule in section 6-3 of this manual must be revised. Also
Section 9 of this manual is to be supplemented accordingly
.
8.4. Ground servicing
The dimensions of the standard aeroplane are given in the aeroplane
drawings (see Section 1). This allows the size of the area required for the
aeroplane in a hangar or for parking to be defined.
NOTE.
The size of the required area is to be increased respectively, to
provide space for supplementary equipment such as antennas of
radio equipment (or other equipment installed according to the
operators options).