SECTION 8
“AERO” Sp. z o.o.
SERVICING
AT-3 R100
Page 8-8
JUNE, 2010
AEROPLANE FLIGHT MANUAL
8.4.4. Lifting
When jacking the aeroplane the following procedure should be followed:
1. Put a stand (under a rib) under each wing to prevent the aeroplane
from tilting.
NOTE.
Instead of using jacks, the aeroplane may also be lifted by hand,
when holding the lower fuselage edges in the area between the
firewall and the wing and in front of the horizontal stabilizer.
2. Locate one of the jacks under the nose landing gear ferrule and the
other two, each side next to the cabin walls, under the main landing
gear box. Apply wooden blocks
3. Lift the aeroplane gradually to the required height. Lift the aeroplane,
raising each jack evenly at the same time and avoid swaying.
9