SECTION 4
„AERO” Sp. z o. o.
NORMAL PROCEDURES
AT-3 R100
Page 4-6
JULY, 2010
AEROPLANE FLIGHT MANUAL
- Ignition – to be set OFF
CHECK
- Fuel level – to be checked with the gauge
CHECK
- Battery and generator – to be switched OFF
CHECK
- All electrical equipment– to be switched OFF
CHECK
- Parking brake – if installed
ON
(2.) Port wing
- Structure – Condition and cleanliness
CHECK
- Wing flap – Condition of structure and play in control
system and hinges
CHECK
- Ailerons – Condition of structure and play in control
system and hinges
CHECK
- Pitot tube – Fixing and cleanliness
CHECK
- Inspection flap – to be closed and locked
CHECK
(3.) Port landing gear
- Tyre – Check the tyre pressure (visually)
CHECK
- Brake system
CHECK
(3.) (4.) Fuselage front part
- Canopy – Visually check cleanliness
CHECK
- Fuel tank – Fuel quantity and locking the filler-cap
CHECK
- Engine cowling – Locking and leaks
CHECK
- Propeller and spinner – Condition and cleanliness
CHECK
- Exhaust pipes – Condition
CHECK
- Antenna of transponder – Condition and fixing
CHECK
- Fuselage bottom surface –Condition and cleanliness
CHECK
- Air intake covers - installed
CHECK
(5.) Nose landing gear
Tyre – Check the tyre pressure (visually)
CHECK
Shock absorber – Condition
CHECK
Towing bar – to be removed from the aeroplane
CHECK
NOTE
It is recommended that Air Intake Covers are installed
when operating the aircraft in ambient temperature
below 12
0
C/54
0
F
9
9
9
9