110
4.
Fit the elbow pipe to the pipe under the condensation pan. Make sure it is water tight by turning connection part on the pipe
(Fig. 112)
5.
Install the water coil pipe connections (Use contra tightening method to prevent any damage to the piping system)
7.8.3 Service and maintenance of cooling coil water
RISK OF INJURY! Make sure that the power connection is disconnected, and fan is not moving
before doing any work on the device
- It is recommended to clean condensate tray every 6 months.
1.
Unlock the lock and turn the handles counter clock-wise direction for opening doors (Fig. 113)
2.
Clean condensate tray with a cloth (Fig. 114)
It is recommended to check the cooling coil for soiling every 6 months.
The cooling coil must be inspected regularly for dirt and dust deposits. If there are dirt and dust deposits on the cooling coil,
these can be removed, using the water.
- The cleaning can be made with cold water. Household cleaners are allowed.
Fig. 112
Fig. 113
Fig. 114
Summary of Contents for EVO-R
