SN
10
p
lu
s
lo
n
g
si
d
e
Assembly
www.aerocompact.com
19
Ballast in front of the back support (under the module)
Attach the ballast clamp to the base rail.
Place the ballast blocks
on the base rail flush with the back support.
Align the ballast clamp and place the ballast block
.
Fix the ballast clamp:
Tighten the screw until the wings of the ballast clamp are flush with the ballast blocks.
Place the ballast blocks
.
Variant 2: Cross struts as ballast rail
The ballast rails can be mounted in the following positions:
behind the first front support (under module)
in front of the first back support (under module)
behind the second back support (under module)
in front of the second front support (under module)
behind the second front support
Take the exact number and position of the ballast rails and blocks from the Aerotool planning doc-
uments.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
