Aerofit SL7042, Owner'S Manual

Assembly

21

STEP 2

1. Attach Toothed Plate (#22) to The Left Floor Stand Frame ASSY On The Back (#11), using:

    four M12*100 SHCS (#27)                         eight Φ13*Φ24*2.5 Flat Washer (#28)

    four M12 Nylon Lock Nut (#29)

2. Attach Toothed Plate (#22) to The Right Floor Stand Frame ASSY On The Back (#12), 

    using:

    four M12*100 SHCS (#27)                         eight Φ13*Φ24*2.5 Flat Washer (#28)

    four M12 Nylon Lock Nut (#29)

3. Attach eight Cable Assembly (#17) to two Floor Stand Frame ASSY (#13), using:

    sixteen M12*75 FHCS (#32)                       thirty-two Φ13*Φ24*2.5 Flat Washer (#28)

    sixteen M12 Nylon Lock Nut (#29)

4. Attach two column (#38) to t two Floor Stand Frame ASSY (#13), using:

    two spring washer (#24)

5. Attach Rack Out Plate (#39) to The Left Floor Stand Frame ASSY (#5), using:

    six M10*25 FHCS (#26)                             six Φ11*Φ13*2.5 Flat Washer (#25)

6. Attach Rack Out Plate (#39) to The Right Floor Stand Frame ASSY (#6), using:

    six M10*25 FHCS (#26)                             six Φ11*Φ20*2 Flat Washer (#25)

7. Attach The Battery Frame ASSY (#43) to The Left Floor Stand Frame ASSY On The Back 

    (#11), using:

    two M10*25 FHCS (#26)                            two Φ11*Φ13*2.5 Flat Washer (#25)

8. Attach Carrage 1 (#15) to The Right Floor Stand Frame ASSY On The Back (#12).

    Attach Carrage 2 (#16) to The Left Floor Stand Frame ASSY On The Back (#11). 

    Attach Counter Weight (#41), Cable Assembly (#14) to The Left Floor Stand Frame 

    ASSY (#5).

    Attach Counter Weight (#41), Cable Assembly (#14) to The Right Floor Stand Frame 

    ASSY (#6).

Note: NOT Tighten Bolts and Nylon Lock Nuts.