MAINTENANCE MANUAL
IFR 4000
2-2-3
Page 57
Aug 1/04
F. Calibration
(1) Test
Setup
PREREQUISITES:
Self Test (para 2-2-3D[1])
TEST EQUIPMENT:
Measuring
Receiver
Signal Generator
Audio
Analyzer
Power
Meter
TNC Precision Short (Male)
RF Amplifier (100 W)
20 dB Directional Coupler (N-Type Connector)
20 dB N-Connector Attenuator
250 MHz Low-Pass Filter (N-Type Connector)
10 dB BNC Connector Attenuator
3 dB, 100 W N-Type Connector Attenuator
STEP PROCEDURE
1. Allow 15 minute warmup for Test Set.
2. Connect the Measuring Receiver to the Signal Generator and calibrate the
Measuring Receiver in Tuned RF Level Mode at the following frequencies
(storing the calibration in the storage location indicated):
1 113.000
MHz
2 75.000
MHz
3 225.000
MHz
4 332.000
MHz
5 400.000
MHz
6 175.000
MHz
7 250.000
MHz
8 108.000
MHz
3. Connect the Measuring Receiver (Modulation Output/Audio Input) to the Audio
Analyzer (High Input). Set the Audio Analyzer to Distortion (DISTN).
4. Press the SETUP Key to display the Setup Menu.
5. Press the H/W TOOLS Soft Key to display the Hardware Tools Screen.
6. Press the CAL Soft Key to display the Calibration Screen.
7. Enter password (
3524
) to display the Calibration Screen.
Summary of Contents for IFR 4000
