background image

 

 

How to Clean Your AeroGarden

TM

 

Pump

Why Clean Your Pump

A clean 

Pump

 really does help keep your garden healthy and 

productive. Cleaning removes nutrient residue and/or plant 

roots that can clog your 

Pump

 and prevent the flow of water 

and nutrients to your plants. It also reduces 

Pump

 noise.

When To Clean Your Pump

We recommend that you clean your AeroGarden 

Pump

 after 

every Garden

 

has reached the end of its life. This will ensure 

that nutrients and/or plant roots do not clog the water flow 

in your next Garden. The most convenient time to clean 

the 

Pump

 is during the 

“Prepare for Your Next Garden”

 

cleaning steps, which can be found in the back of any 

Seed/

Plant Kit Guide.

 

In some instances, a planted AeroGarden may start to make 

noise. This can be a sign of residue build-up inside the 

Pump

If this occurs, we recommend cleaning the 

Pump

 at the time 

you notice the noise. This will not harm your plants.

Page 1

A Clean Pump Helps Keep Your Garden Healthy and Productive!

Please refer to these photos, and the one 

on page 2, to identify parts referred to in 

the Pump Cleaning instructions.

Lamp Arm

Grow Surface

Bowl

Base

Control Panel

AeroGarden Components

Lamp Hood

Cross Beams & Brackets

Brackets

  

Cross Beams      

AeroGarden

Supplies Needed:

• Small flat-head screwdriver
• Small pliers or tweezers 

(optional)

• Butter knife
• Sink with hot water
• Dish soap
• Towel 

(optional)

• Extra AeroGarden 

Filters

Additional Supplies for a Planted Garden:

• Shallow dish (such as baking pan) 
• 1 Gallon container (such as a bucket, 

 

large bowl or cooking pot)

 

Time Needed:

Approximately 20-25 minutes the first 

time and 15 minutes once familiar with 

the process

A Note About These Instructions

Cleaning an AeroGarden 

Pump

 entails disassembling a portion of your AeroGarden, taking apart the 

Pump,

 

cleaning all the 

Pump Parts

, and then putting the 

Pump

 back together.   

We realize that not everyone is comfortable diving into the inside of an AeroGarden. If you are wary about 

taking your 

Pump

 apart, or get stuck anywhere during the process, please call Customer Service to discuss 

options for replacing your 

Pump

.

Summary of Contents for AeroGarden PRO









Reviews: