AeroGarden AeroGarden PRO, Cleaning Manual

Page 3

Remove Pump and Clean Pump Tower

Follow the steps whether your are cleaning a 

Pump

 from a planted 

AeroGarden or an empty AeroGarden.

Unplug your AeroGarden.

Remove 

Bowl

 from 

Base

. 

Remove 

Grow Surface 

from

 Bowl 

and bring to sink or set on towel.  

Hint: Lift the 

View Door

 and slide one hand into the Bowl to lift.

Remove 

Filter

 from the back of the 

Pump Tower

 and  

rinse under hot water or discard if you have a new 

Filter

. 

(Missing or torn 

Filter? 

See Troubleshooting on Page 7.)

Turn 

Grow Surface

 upside down and remove 

Cover Plate

. 

1

  Insert flat-head screwdriver at an angle into rectangular  

slot on right side of 

Pump Tower

 and gently push down  

on screwdriver.

2

  Repeat step “1” on rectangular slot on left side 

of 

Pump Tower

.

A

B

C

D

E

Filter

Grow Surface

Cover Plate

Pump

Pull 

Pump Wire

 from 

Wire Slot

 but  

keep it attached to 

Grow Surface

.

Rinse out any residue or roots from 

Pump 

and

 Pump Tower 

in sink. It is 

okay to get everything (the 

Pump, 

Pump Wire 

and 

Grow Surface

) wet.

G

H

1

2

2

F

Remove the 

Pump

 by inserting the flat-head screwdriver 

into the space under the 

Pump

. Push down on the handle 

of the screwdriver to lift the 

Pump

 out of the 

Pump Tower

.