background image

Basic Reminders About Your AeroGarden

AeroGarden Deluxe Control Panel

• Water Low

When light blinks add 

water up to “Fill To Here.”

• Add Nutrient 

(Feed garden - Basic Feeding)

When “Add Nutrient” and “Water 

Low” lights start blinking (every 

2 weeks), add 2 nutrient tablets* 

and fill the Bowl with water up to 

Fill to Here.” Press and release 

“Reset” button to restart nutrient 

timer and turn off blinking lights.

*

see tending & Harvesting guide for 

plant-specific nutrient information.

• Replace Grow Bulbs*

When light blinks (after 6 months of use), 

it is time to replace Deluxe Grow Bulbs

Replacement bulbs can be ordered at 

www.aerogardensupport.com 

or from your 

retailer. After replacing Deluxe Grow Bulbs

press “Reset” button to restart grow bulb 

timer and turn off flashing light.

note:  if you store your aerogarden Deluxe between 

uses, grow bulb timer automatically stops 

when aerogarden Deluxe is unplugged.

*see complete replacement instructions on 

next page.

• Lights On/Off

Use to occasionally override built-in light timer. Once pushed, lights 

will stay off/on until the next time built-in light timer is set to go on/

off. This will not affect the timing of your light cycle and occasional 

use of this feature will not harm your plants.

• 24-Hour Light

Illuminated white 

light indicates the 

AeroGarden Deluxe 

is on “24-Hour Light” 

setting.

• Remove Bio-Domes

When plants appear through hole in 

Seed Pod Labels, remove  Bio-Domes 

and discard or recycle.

note:  never remove Seed Pod Labels.

12

Summary of Contents for Deluxe 100733-BLK

















Reviews: