5
3
1
Attach the Male Quick Release Clip to the
Retract Shoulder Bracket using M3x8mm
and M3x6mm Button Head Cap Screws,
6mm North-South and 8mm East-West,
and 3mm Aluminium low profile Nuts.
2
Attach the Twin Skid Foot Clip using M3x12mm
Socket Head Cap Screws and Outer Housing Spacer.
X10
X5
X4
X4
X4
X10
X2
Begin by fixing your M3 Outer Housing
Spacers to your Landing Gear Plates using
M3x8mm Socket Head Cap Screws and 1mm
Washers.
Note: only put the Outer Housing Spacers in
that are shown in the picture below.
Attach the Male Quick Release Clip to the
Retract Shoulder Bracket using M3x8mm
and 3mm Aluminium low profile Nuts
with M3 Nylon washers on the face of the
Shoulder Bracket.
X4
X4
X4
X2
