7
10
11
8
Place the Retract Main Housing onto the Core
of your Craft, making sure the Servo is to the
rear.
Repeat step 10 for the second leg.
You can now clip your Landing Gear onto your main
housing as shown here.
9
Attach using M4x12mm Socket Head Cap Screws and
M4 Locking Washers. (Mounting Positions are the same
for SkyJib Craft)
X4
X4
Note: If you have
obstruction from
the servo when
mounting the Gear
Rail assembly,
then remove
the Retractable
Landing Gear and
remount it with the
servo to the front.
