AEROPRAKT-32 Pilot Operating Handbook
A32-214-POH
34
The aileron drooping (flap extension) mechanism (
) consists of a beam with lever (1)
hinged to the upper rim of the frame No.3. Flap position setting is achieved with the fixer (2)
having three holes for the pin (3) on the lever. Unfixing is achieved by bending the spring-
like lever to the right. After the pin comes out of the fixer hole the lever can be set to the
selected position. When the pin aligns with another hole of the fixer the lever springs back
fixing the flaperons in a different position.
Fig. 8. Flap extension mechanism
Aileron drooping (flap extension) angles: 1
st
position
– 10±1°, 2
nd
position
– 20±1°.
