SAFETY GUIDELINES:
DANGER!
Potential hazard that will result in serious injury or loss of life.
WARNING
!
Potential hazard that could result in serious injury or loss of life.
CAUTION!
Potential hazard that may result in moderate injury or damage to equipment.
NOTE: The world “Note” is used to inform the reader of something he/she needs to know about the tool.
PERSONAL SAFETY
These precautions are intended for the personal safety of the user and others working with the user. Please take time to
read and understand them.
DANGER!
Potential hazard that will result in serious injury or loss of life.
Keep children away
from the work area. Do not allow children to handle power tools.
Do not use a tool that is leaking air
, that has missing or damaged parts, or that requires repairs. Verify that all screws
are securely tightened.
Never attempt to override tool safety features.
Do not allow unskilled or untrained individuals to operate
Air-powered impact wrench or any other air-powered
tools.
Do not use oxygen or any other combustible or bottled gas
to power air powered tools. Failure to
observe this warning can cause explosion and serious personal injury or death. Use only
the compressed air to power air-powered tools, Use a minimum of 25’ (7.6m) of hose to
connect the tool to the compressor. Failure to comply will result in serious injury or loss of
life.
Risk of electric shock:
Do not expose a compressor to rain. Store it indoors. Compressor must be
grounded. Do not use grounding adaptors.
Risk of personal injury:
Do not direct compressed air from the air hose toward the user or other personnel.
Risk of inhalation:
Never directly inhale the air produced by the compressor.
Risk of bursting:
Do not adjust the pressure switch or safety valve for any reason. They have been preset at the factory
for this compressor’s maximum pressure. Tampering with the pressure switch or the safety valve may cause
personal injury or property damage.
Risk of burns:
The pump and the manifold generate high temperatures. In order to avoid burns or other injuries, do not
touch the pump, the manifold, or the transfer tube while the compressor is running. Allow the parts to cool
down before handling or servicing. Keep children away from the compressor at all
times.
Risk of bursting:
Make sure the regulator is adjusted so that the compressor outlet pressure is
set lower than the maximum operating pressure of the tool. Before starting the
compressor, pull the ring on the safety valve to make sure the valve moves freely. Drain
water from tank after each use. Do not weld or repair tank. Relieve all pressure in the
hose before removing or attaching accessories.
WARNING!
Potential hazard that will result in serious injury or loss of life.
Always ensure that the work piece is firmly secured
leaving both hands free to control the tool.
Always keep your air tool clean and lubricated.
Daily lubrication is essential to avoid internal corrosion and possible
