3
1) Always wear appropriate gloves, eye protection, and a respirator or mask when painting.
2) Do not operate or spray near children. Keep children away from equipment at all times.
3) Don not overreach or stand on an unstable support. Keep effective footing and balance at all times.
4) Stay alert and watch what you are doing.
5) Do not operate the unit when fatigued or under the influence of drugs or alcohol.
6) Do not kink or over-bend the hose.
7) Do not expose the hose to temperatures or to pressures in excess of those specified by the manufacturer.
8) Do not use the hose as a strength member to pull or lift the equipment.
9) The Max. pressure of the air hose is 22.8Mpa, the normal pressure is 20.7Mpa
10) The paint can be compatible: phenol aldehyde paint series, nitryl paint series, alkyd paint series, epoxy resin paint series,
oxidized rubber paint series, latex paint series, water soluble paint series. The paint should be put in shade and dry
place.
11) Be aware of any hazards presented by the material being sprayed and consult the markings on the container or
information supplied by the manufacturer of the material to be sprayed, including requirements for the use of personal
protective equipment.
12) Do not spray any material there the hazard is not know.
Technical Data
TYPE:
R520
Maximum delivery gpm (lpm)
3.2Lpm(0.85Gpm)
Power requirements
230±10%Vac,
50±1Hz
Working environment temperature
requirement:
5
℃
~40
℃
Input power
2200W(3HP)
Working environment humidity requirement: 30%~95%
Maximum working
pressure
3300PSI
Working environment altitude requirement:
1000m
Sound pressure level:
73.9 db
Transportation and storage temperature
requirement:
25
℃
~55
℃
Vibration value:
3.24 m/s²
Dimensions Weight
20kg
Warning
The following warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point
symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risks. Refer back to these
warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Sprayer generates sparks. When flammable liquid is used in or near the sprayer or for flushing
or cleaning, keep sprayer at least 20 feet (6 m) away from explosive vapors.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
•
Ground equipment and conductive objects in work area. Read Grounding instructions
.
• If there is static sparking or you feel a shock,
stop operation immediately.
Do not use
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
