5
Copy Right © 2018 Oxidizer Pro, Inc. All Rights Reserved
INSTALLATION REQUIREMENTS
Electrical Requirements:
•
AeroClean requires 120-volt, 60 Hz power.
•
An approved GFCI outlet is recommended for supplying power to
your AeroClean.
•
Never use an extension cord, or a power adapter, other than
the one provided.
Location Requirements:
•
Never install the AeroClean in areas where water may freeze.
AeroClean will always retain some water in the unit and freezing can
cause damage to internal components.
Water Requirements:
•
Water quality may affect the performance of your AeroClean. If you
have water quality concerns such as high iron or mineral content,
consult a water filtration expert.
Prior To Installation:
•
Remove your AeroClean from its packing and inspect for any shipping
damage.
•
Turn off the hot and cold-water supply to your washing machine.
Tools you will need:
•
Phillips head screwdriver
•
Bucket or container to catch water when disconnecting hoses
Optional tools
•
Large pliers to tighten and remove hoses if needed
Note:
The manufacturer of the AeroClean System strongly recommends that,
when you have the System installed, you replace your existing washing machine
hoses either with ozone compatible (
EPDM lined
) hoses or stainless-steel hoses,
which we can sell to you. Use of your existing washing machine hoses increases
the likelihood of leaks and decreases the effectiveness and environmental benefits
of your new AeroClean System.
