12 | Tag Mounting
Figure 11. Fixed Tag Trailer Mount
Installing a Fixed Trailer Mount on a Trailer
1.
Insert the Tag into the mount (with the thin side of the Tag first).
Verify that the T2 Tag’s multifunctional attachment plate is not
attached to the Tag on its back side.
2.
Slide the Tag until it snaps into place.
3.
Insert the holster cover until it completely sinks into the aperture.
Note that when the cover is completely in place, it should be sunk into
the holster in a manner that its surface is sunk deeper than the fixed
mount’s bottom surface.
4.
Attach the AeroScout and barcode labels to the upper side of the
holster and to the cover, making sure that the labels fit
exactly
in place.
Note that the barcodes on the mount must be identical to the
barcodes on the tag.
5.
Attach the mount to the vehicle.
Figure 12. Fixed Tag Trailer Mount attached to vehicle
Note
To learn more about the Fixed Tag Trailer Mount, please refer to the
AeroScout Fixed Tag Trailer Mount User Guide
.
