DA20-100 ‘Katana’ 4X Manual
AVIONICS
Neither the software nor the documentation may
be used for real aviation and training purposes.
09<05
page
OBS can be set by pulling the small NAV frequency selection knob. OBS
display will start flashing to indicate the OBS selection mode.
Additionally To (TO) and From (FR) flags are displayed of a station is tuned.
In the case the unit does not receive a signal, FLAG appears on the screen
and all bars of the deviation indicator will be displayed.
BRG MODE
The Bearing Mode (BRG) displays the direct course to the tuned station.
Neither the course deviation indicator nor OBS will be displayed. Instead
the TO marker will appear and a three-digit number will indicate the direct
bearing/direction to the station.
In the case the unit does not receive a signal, three dashes (---) will be
displayed instead of the bearing digits.
RAD MODE
Selecting the Radial mode allows “radial from” information to be shown.
Neither the course deviation indicator nor OBS will be displayed. Instead
the FR marker will appear and a three-digit number will indicate the radial.
In the case the unit does not receive a signal, three dashes (---) will be
displayed instead of the radial digits.
AUTO-TO
Pressing the nav mode button longer than two seconds will activate the
Auto-TO mode no matter which navigation mode has been active before.
CDI Mode will be activated and the OBS is set with direct course to the
tuned station.
Summary of Contents for DA20-100
Page 1: ...MANUAL DA20 100 Katana ...
Page 2: ......