DA20-100 ‘Katana’ 4X Manual
AVIONICS
Neither the software nor the documentation may
be used for real aviation and training purposes.
09<17
page
9.5.6 FLIGHT TIME RESET
Use the SEL button to select the FT display.
Press and hold the CTL button for 3 seconds
or until 99:59 appears on the display. FT will
be reset to 00:00.
O.A.T.
VOLTS
SELECT CONTROL
14.3E
00 0 0
:
UT
FT
LT
ET
9.5.7 ELAPSED TIME COUNT UP
Use the SEL button to select the ET display.
Press CTL button to start ET counting. ET
will count up to 59 minutes and 59 seconds
and will then be switched to hours and
minutes, counting up to 99 hours and 59
minutes. Pressing the CTL button again will
reset ET to zero.
O.A.T.
VOLTS
SELECT CONTROL
14.3E
2 5 0
:
UT
FT
LT
ET
9.5.8 ELAPSED TIME COUNT DOWN
Use the SEL button to select theET display.
Press both, the SEL and the CTL button, at
the same time to enter the set mode. A
countdown from a maximum of 59 minutes
and 59 seconds can be set and will start
counting as soon as the last digit has been
left with the SEL button. As the count down
gets zero the alarm will be activated and the
display starts flashing. Pressing either SEL
or CTL button will reset the alarm. As the
display reaches zero, it will count up.
O.A.T.
VOLTS
SELECT CONTROL
14.3E
0 0 1
:
UT
FT
LT
ET
0
0
Summary of Contents for DA20-100
Page 1: ...MANUAL DA20 100 Katana ...
Page 2: ......