I
GB
Important:
Before using the compressor, always read the instructions manual
and consult it if you have any doubts regarding compressor functioning.
Important:
safety goggles MUST be worn when using the compressor.
Warning:
certain parts of the compressor may become very hot.
Warning:
To avoid risks of electric shock, always use sockets with a ground connection
PRECAUTIONS
Never direct the jet of air towards persons, animals
or your body. (Always wear safety goggles to protect
your eyes from flying objects that may be lifted by
the jet).
Never direct the jet of liquids sprayed by tools
connected to the compressor towards the
compressor.
Never use the appliance in your bare feet or with wet
hands or feet.
Never pull the power cable to pull the plug out of the
socket or to move the compressor.
Never leave the appliance exposed to adverse
weather conditions (rain, sun, fog, snow).
Never transport the compressor with the reservoir
pressurized
Never weld or machine the reservoir. In the case of
faults or corrosion, replace it completely.
Never allow inexpert persons to use the compressor.
Keep children and animals away from the work
area.
Never position flammable or nylon or fabric articles
close to and/or on the compressor.
Never clean the compressor with flammable liquids or
solvents. Clean with a damp cloth only, after making
sure that you have unplugged the compressor.
The compressor is designed only to compress air and
must not be used for any other type of gas.
The compressed air produced by the compressor
cannot not be used for pharmaceutical, food or
hospital purposes except after particular treatments.
It is not suitable for filling the air bottles of scuba
divers.
Never use the compressor without guards (belt
guard) and never touch moving parts.
The compressor must be used in a suitable
environment (well ventilated with an ambient
temperature of between +5°C and +40°C)
and never in places affected by dust, acids,
vapors, explosive or flammable gases
.
Always maintain a safety distance of at least 4
meters between the compressor and the work
area.
Any coloring of the belt guards of the compressor
during painting operations indicates that the
distance is too short.
Insert the plug of the electric cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
For 3-phase versions, have the plug fitted by a
qualified electrician according to local regulations.
When starting the compressor for the first time,
check the correct direction of rotation and that this
matches the direction indicated by the arrow on the
belt guard (versions with plastic protection) or on
the motor (versions with metal protection).
Use extension cables with a maximum length of
5 meters and of suitable cross-section. The use
of extension cables of different length and also of
adapters and multiple sockets should be avoided.
Always use the switch of the pressure switch to
switch off the compressor or use the switch of the
electric panel for models equipped with this. Never
switch off the compressor by pulling out the plug in
order to avoid restart with pressure in the head.
Always use the handle to move the compressor.
When operating, the compressor must be placed
on a stable, horizontal surface to guarantee correct
lubrication.
Position the compressor at least 50 cm from the
wall to permit optimal circulation of fresh air and to
guarantee correct cooling.
THINGS TO DO
BELT-DRIVEN ELECTRIC COMPRESSOR
THINGS
NOT
TO DO
Summary of Contents for 556182 - 62
Page 2: ...3b 2a 1 2b 3a 6a 4 5 ...
Page 3: ...7a 7b 8 6b 9b 9a 11 10 ...
Page 4: ...12 15 13 14a 14b 17 16 18a ...
Page 5: ...20b 21 19 18b 20c 20a ...
