ABL1000 Hardware Manual
Electrical Specifications and Installation
3.4. Limits, Marker, and Machine Direction
Aerotech stages are configured to have positive and negative "machine" directions. The machine direction
defines the phasing of the feedback and motor signals and is dictated by the stage wiring (refer to
for Motor and Feedback phasing information). Programming direction of a stage is set by the controller
that is used to move the stage. Programming direction is typically selectable in the controller, while machine
direction is hardwired in the stage.
shows the machine direction of ABL1000 stages.
Figure 3-2:
Machine Direction
www.aerotech.com
Chapter 3
27
