pag.
34 di 64
Use and Maintenance Manual
M
MCCHH88--1111//EEM
M -- M
MCCHH1133--1166//EETT
Standard
Cap.5 _ Handling and installation
UNPACKING
5 - HANDLING AND INSTALLATION
5.1
Standard
series compressors are sent fully assembled,
with the flex hoses separate.
The compressor is packed in a cardboard box on a
pallet to simplify handling and transport.
The box containing the compressor must be moved
according to the instructions shown on the box itself.
The machine is supplied with the following as
standard:
- two 1200 mm refill hoses with filling valves
- use and maintenance manual
- use and maintenance manual appendix (safety
regulations)
- lubricating oil (2 litres)
- active carbon and molecular sieve filte cartrige.
HANDLING
5.2
After separating the compressor from its packaging
it can be transported to the designated placement
area.
Transfer will require the use of a fork-lift or
transpallet (of suitable load-bearing capacity): the
forks must be positioned in the support feet on which
the europallet is positioned.
If the compressor is not on a pallet it can be handled
manually via the carry handles (
a
) on the frame.
IMPORTANT
Proceeding with the utmost when lifting, transferring and positioning the
compressor.
WARNING
Manual lifting of the compressor requires at least two workers and in any case no
individual worker should lift more than 30 Kg.
a
a
