Cap.2 _ Basic information on the compressor
pag.
17
Use and maintenance manual
MCH-36
2.3 - GENERAL INSTRUCTIONS
- This manual must be read carefully before transporting, installing, using or carrying out any
maintenance on the compressor.
- It must be preserved carefully in a place known to compressor users, managers and all
transport/installation/maintenance/repair/final dismantling personnel.
- This manual indicates the purposes for which the compressor can be used and gives
instructions for its transport, installation, assembly, adjustment and use. It also provides
information on maintenance tasks, ordering spare parts, residual risks and staff training.
- It should be born in mind that the use and maintenance manual can never replace proper
experience; some maintenance jobs are particularly difficult and in this regard the manual
only offers general guidelines on the most important tasks, which must be carried out by
personnel with proper training (e.g. acquired during training courses run by the
manufacturer).
- This manual is an integral part of the compressor and must be stored in a suitable
container near the compressor until its final demolition. If the manual is lost or damaged a
copy can be requested from the manufacturer.
- Make sure all users have understood the regulations for use and the meaning of the
symbols on the compressor.
- Observance of these technical instructions can prevent accidents: instructions have been
drawn up in compliance with EEC Machinery Directive 89/392 and subsequent amendments.
- In any case always observe national safety regulations.
- Do not remove or damage guards, labels or notices, especially those required by law.
- The adhesives attached to the compressor are there for safety purposes. They must be
replaced if they become illegible.
- This manual reflects the technical knowledge available at the time the compressor was sold
and cannot be considered inadequate simply because updated at a later time on the basis of
new experience.
- The manufacturer reserves the right to update products and manuals, without any
obligation to update preceding products or manuals except in exceptional circumstances.
- To request or receive any updates or additions to this use and maintenance manual (which
shall be considered an integral part of the manual) apply via the contact numbers given on
page 12.
- Should you have any other queries or suggestions as to how to improve the manual please
contact the manufacturer.
- Should you sell the compressor AEROTECNICA COLTRI Srl invites you to provide us with
the details of the new owner so that any new additions to the manual can be sent on.
WARNING:
