Cap.7 _ Maintenance
pag.
47
Use and maintenance manual
MCH-36
7.7 - CHANGING THE INTAKE FILTER
After putting the compressor into service the intake filter must be changed after the first 50 working hours.
The air filter must then be changed every 250 working hours or annually.
Every 50 working hours rotate the filtration cartridge inside the filter 90°.
Do not carry out these tasks if the compressor has only just shut down; wait for the com-
pressor to cool.
All maintenance work must be carried out with the compressor OFF and the power supply lead
unplugged from the mains socket.
DANGER:
The air intake filter must be changed every 250 wor-
king hours or annually.
To change the filter proceed as follows:
- unscrew the air filter cover (
a
) by rotating it anti
clockwise;
- remove the air filter cartridge (
b
);
- replace the cartridge with a new one;
- re-close the cover (
a
): screw it back on
clockwise.
a
b
If the compressor is used in a dusty environment the filter change interval should be reduced to
every 100 hours.
IMPORTANT:
Filter cartridge
Code 36-00-0510
