Step 2:
Attach head assembly into flexible metal
stand. Connector looks it lacks a hook,
but please note that it is intentionally
removed and normal.
Step 3:
Install the standard clamp mount (Also
other optional mounts are available). And
fasten knob screw. Do not tight too hard.
It is a good idea to leave a room for easy
rotation. Connect the AC-DC adapter into
female connector at the bottom.
Step 4:
Your Sunflower is ready for use! Make
sure your Sunflower is connected directly
to a power outlet, and not an extension
cord or power strip. The Sunflower needs
the voltage.
How to operate:
Turn switch downward to run motor and lamp, upward to turn on
lamp only (or vice versa). To turn off place switch in the middle. Please review care
and maintenance guide on page 5 prior to use.
